欢迎访问青州久泰包装设备有限公司!

My title

GCP-24A负压等液位灌装机

名称:GCP-24A负压等液位灌装机
详细信息 :


该类灌装机采用低真空负压式灌装,广泛应用于不含气的葡萄酒、黄酒、果酒、饮料、酱油、醋及其他液体的灌装,灌装容量范围大,适用瓶型多。


主要特点有:


1、该机采用特制灌装阀,大功率真空泵,保证灌装后液位一致。


2、灌装时密封瓶口,液体沿瓶壁下流,有效控制了灌装时液体冲击引起的泡沫,防止液体外溢。


3、该机变频调速,灌装速度快,设有过载保护装置,卡瓶停机,开机软启动,采用弹性托瓶装置,减少瓶子的破损。


4、灌装量调整靠加减灌装阀上的垫片调整,方便快捷。


5、该机灌装范围大,灌装量可在100-1500毫升调整。


6、适用瓶子高度范围广,可在180-380毫米之间调整。(超出范围可定做)


7、主要密封件由进口硅胶制造,主要零件由符合食品卫生标准的304不锈钢制造。


8、灌装阀容易拆卸,清洗方便。


9、16头、24头及以上灌装机配有可调整式进瓶螺旋,使进瓶更加顺畅。


The filling machine with low vacuum filling, widely used in gas free wine, wine, wine, beverage, sauce, vinegar and other liquid filling, filling capacity range, applicable to the bottle type.

Main features are:

1.the machine uses a special filling valve, high power vacuum pump, to ensure the consistency of the liquid level after filling.

2.the bottle mouth is sealed during filling, liquid along the bottle wall dirty, effective control of the filling liquid shock caused by the bubble, to prevent the overflowing of the liquid.

3.the machine frequency conversion speed, filling speed, equipped with overload protection device, card bottle stop, boot soft start, the use of flexible bottle holder device, reduce the bottle damage.

4.filling volume adjustment by addition and subtraction filling valve gasket adjustment, convenient and quick.

5.the machine filling range, filling volume can be adjusted in 100-1500 ml.

6.suitable for a wide range of bottles, can be adjusted between 180-380 mm. (out of range can be made to order)

7.the main seal by the import of silica gel, the main parts of the food hygiene standards in accordance with the 304 stainless steel.

8. the filling valve is easy to disassemble, easy to clean.

9.16,24 and above filling machine is equipped with adjustable into the bottle, so that the bottle into the bottle more smoothly.